EQUL-GLASCOL桌上型振荡器-实验室箱体/摇床-仪器设备-生物在线
EQUL-GLASCOL桌上型振荡器

EQUL-GLASCOL桌上型振荡器

商家询价

产品名称： EQUL-GLASCOL桌上型振荡器

英文名称：

产品编号： _TY7622

产品价格： 0

产品产地： 美国

品牌商标： EQUL-GLASCOL

更新时间： null

使用范围： null

上海易扩仪器有限公司
  • 联系人 :
  • 地址 : 上海市肇嘉浜路
  • 邮编 : 200032
  • 所在区域 : 上海
  • 电话 : 133****6815
  • 传真 : 021-23010002
  • 邮箱 : info@equl.com
进入展台

Shakers

振荡器

  • Variable speeds for more thorough shaking
  • 可变速功能可以确保彻底的振荡
    　
  • Designed to accept a variety of holders to meet a wider range of shaking needs
  • 不同的支架可满足不同的需求
    　
  • DC filtered motors to handle heavier loads and provide greater durability
  • DC filtered电机可承担较重的负荷和提供较大的耐力
    　
  • Motions designed to simulate shaking by hand
  • 模拟手工的振荡
    　
  • Designed to reduce the handling of glassware for greater safety and cost savings
  • 减少了手动的麻烦
BENCH-TOP SHAKER
用于分子杂交, DNA提取, 免疫测定, 血细胞溶解等医药及工业应用.

台式摇床适合各种玻璃容器, 解决各种试验室混合需要
　
马达转速可调,最大转速可达125rpm, 适合各种摇动速度

无需载荷平衡, 安装方便, 可安装不同种的容器, 设备体积小, 载荷量可达9.1Kg


Reciprocating shaking and mixing with bench-top convenience is now available. Glas-Col''s Bench-Top Shaker is an adaptable, user-friendly shaker that is capable of many hours of continuous shaking and mixing. This shaker:
  • features a variable-speed motor that provides gentle, low-speed shaking to vigorous, high-speed shaking.
  • requires no load balancing.
  • features a built-in shaking head with easy-to-adjust knobs for quick loading.
  • will accept a variety of glassware holders for mixing and shaking.
  • may be placed inside a fume hood for added safety.
  • features a strong, heavy-duty construction that permits maximum loads of up to 20 pounds.

Specifications
Motor Speed: Adjustable to 125 rpm maximum.
Load Weight Capacity: Up to 20 lbs. (9.1 kg).
Electrical: 6-ft, 3-wire grounded cord.
Electrical Rating: 50/60 Hz, 120V & 240V.
Size: 13"w x 10"d x 11-3/4"h.
Weight: 48 lbs. (21.8 kg).
Finish: Foxtip gray and charcoal.
Catalog Number Description Input
Voltage		 RPM Product
Weight (lbs)
099A S60012 Shaker base 120V 2-125 54.0
099A S60024 Shaker base 240V 2-125 54.0
　


SEPARATORY FUNNEL HOLDER
(up to 500 ml)

The funnel holder will accommodate up to three funnels at once, depending on size, and can hold funnels as large as 500 ml. You can mount one or two of these holders on the shaker base.
Just load the funnels with the stopcock down, adjust to the desired shaking position, and turn on the shaker. The funnel is secured by an easily adjusted yoke, and the stopper is held in place by a built-in elastic band.

If you''re mixing materials that create pressure while being shaken, the pressure can be relieved automatically with the Snorkel Stopper, which is substituted for the regular stopper, and is held in place with the elastic band. It automatically relieves pressure over one pound (psi).

Catalog Number Description Product Weight (lbs)
099A FR435SS One, two, or three 60-250 ml funnels 3
099A FR600SS Two 125-500 ml funnels 4
　


SEPARATORY FUNNEL HOLDER (1000 ml & larger)
The separatory funnel holder is designed to allow 1- or 2-liter separatory funnels to be held in the positions necessary for sample processing, but with minimum handling of fragile funnels. From the upright, or fill, position the funnel may be rotated to the 45° or 60° position for shaking and then returned to the upright position for the addition of materials or extracting. The flask may remain in the holder during the entire cycle. This holder requires the use of the Universal Mounting Platform (099A BT6000).
Catalog Number Description Dimensions (in) Product Weight (lbs)
099A BT2000S 2-liter separatory funnel holder
(099A BT6000 required)		 12.50h x 9.50w x 5.50d 3.2
099A BT1000S 1-liter separatory funnel holder
(099A BT6000 required)		 11.25h x 9.50w x 5.50d 3.2
R80 258 Up to 1 liter stopper retainer 　 0.5
R80 255 2-liter stopper retainer 　 0.5
When using standard funnels with glass, plastic or teflon stoppers, our stopper retainer is required.
　
UNIVERSAL MOUNTING PLATFORM 　
The Universal Mounting Platform is required for mounting Series BT glassware holders. It also provides a horizontal surface for the easy attachment of a wide variety of vessels that need to be shaken.

The Universal Mountain Platform is set conveniently on top of the shaker head and is held securely with three hand-tightened locking knobs. The Series BT holders also install quickly atop the platform through pre-located mounting holes. Two locking knobs secure each holder in place. The platform accepts two holders.
　

　


Catalog Number Description Product Weight (lbs)
099A BT6000 Universal mounting platform 4.0
　

　
LARGER-FINGER CLAMP
Larger-finger clamps are available for use with the Bench-Top Shaker. They can hold various types of glassware up to 3-1/2" (89 mm) in diameter. The clamps may also be adjusted to hold glassware at the most effective shaking angle. Sold individually.
Catalog Number Description Product Weight (lbs)
R96 344 Large-finger clamp, each 1
　


TEST TUBE RACK HOLDER

The test tube rack holder lets you shake one or two entire racks of test tubes at once. Even racks containing different size tubes can be shaken simultaneously. Racks are held in place by a restraining cover. This cover automatically releases and remains captive when retaining nuts are loosened for rack insertion or removal. Existing racks up to 12" x 5" (30.5 x 12.7 cm) may be used with capped or stoppered tubes from 75 to 200 mm long.

Catalog Number Description Dimensions (in) Product Weight (lbs)
099A TR700 Test tube rack holder 11.50h x 13.25w x 6.75d 3.2

ERLENMEYER FLASK HOLDER
Model 099A EF521 lets you shake one to four Erlenmeyer flasks at a time. It will work with uncapped flasks (for gentle shaking), or you can close them with screw caps or tapered stoppers. An elastic band automatically holds the stoppers in place. One or two flask holders can be shaken at once. A locking knob secures holder in optimum positions for both loading flasks and for effective shaking. While mounted on shaker, the holder can be rotated 180°. Each holder adjusts to accommodate three 500 ml flasks or four 125 or 250 ml flasks. A combination of flasks is possible, as well.
Catalog Number Description Dimensions (in) Product Weight (lbs)
099A EF521 Erlenmeyer flask holder 8.00h x 12.75w x 4.50d 5.3
　
CENTRIFUGE TUBE HOLDER 　
The centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate. Each holder accommodates up to eight tubes. Up to three holders can be shaken at once. The total load may be up to five pounds (2.27 kg) and need not be balanced. If sizes other than those listed in the table are needed, call us with your requirements.


Catalog Number Description Dimensions (in) Product Weight (lbs)
099A SR815 15 ml glass centrifuge tubes
Test tubes up to 16 mm dia.
126-160 mm long (stoppered)		 9.00h x 6.50w x 4.50d 1.3
099A SR850 50 ml glass centrifuge tubes
Test tubes up to 28 mm dia. 140-180 mm long (stoppered)		 9.00h x 6.50w x 4.50d 2.1


FAT-EXTRACTION TUBE HOLDER

This tube holder lets you use the Bench-Top Shaker for Mojonnier fat extraction. Each holder accepts up to four flasks, 37 mm in diameter.
Maximum of two holders can be shaken at one time. The load max of up to five pounds (2.27 kg) need not be balanced. Unstoppered flasks may be shaken vertically. For horizontal shaking, flasks should be stoppered and stoppers held with built-in restrainers.
Catalog Number Description Dimensions (in) Product Weight (lbs)
099A MFG3 Fat-extraction tube holder 8.75"h x 13.00"w x 4.50"d 2